Alessandro Ranellucci 4bffa9cb6b Use perimeter length, not area, to detect small perimeters. #355

2012-05-14 00:30:52 +02:00

..

ExtrusionPath

…

Fill

Fixed regression causing poor adhesion of rectilinear infill to perimeters

2012-05-04 20:51:09 +02:00

Format

…

Geometry

Require Math::Clipper 1.07 which includes the fix for #233

2012-05-01 15:36:07 +02:00

GUI

Bugfix: error when slicing twice from plater

2012-05-05 21:26:19 +02:00

Print

New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198

2012-05-05 16:36:10 +02:00

Config.pm

Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318

2012-05-01 15:02:33 +02:00

ExPolygon.pm

Bugfix: some nearly-thin walls were discarded. #261

2012-05-05 17:07:38 +02:00

Extruder.pm

Bugfix: removed warnings. #365

2012-05-13 22:56:40 +02:00

ExtrusionLoop.pm

…

ExtrusionPath.pm

Bugfix: removed warnings. #365

2012-05-13 22:56:40 +02:00

Fill.pm

Use honeycomb pattern for support material

2012-04-30 23:50:38 +02:00

Geometry.pm

…

GUI.pm

Use a separate thread for slicing so that GUI doesn't lock up. Also, add a Cancel button. #32 #35

2012-05-05 21:08:15 +02:00

Layer.pm

Use perimeter length, not area, to detect small perimeters. #355

2012-05-14 00:30:52 +02:00

Line.pm

…

Point.pm

…

Polygon.pm

Bugfix: some nearly-thin walls were discarded. #261

2012-05-05 17:07:38 +02:00

Polyline.pm

Bugfix: removed warnings. #365

2012-05-13 22:56:40 +02:00

Print.pm

New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198

2012-05-05 16:36:10 +02:00

Surface.pm

New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198

2012-05-05 16:36:10 +02:00

SVG.pm

Bugfix: infill every N layers was consuming large amounts of memory when used with models having sloping walls. #259

2012-05-01 18:51:47 +02:00

TriangleMesh.pm

Avoid undef errors while keeping the debug so root cause can be found.

2012-05-10 22:23:24 +01:00