OrcaSlicer-bambulab

Fill

Reworked discretization step of Archimedean Chords infill to lower

2019-03-07 16:01:46 +01:00

Format

Fix of loading the variable layer height profile and the SLA support

2019-05-24 12:17:54 +02:00

GCode

Fixed unit tests when run with range checks on std::vector

2019-05-22 16:48:20 +02:00

Rasterizer

Further optimizations for SLA memory usage.

2019-04-25 18:48:31 +02:00

SLA

Eliminate some warnings

2019-05-20 12:29:14 +02:00

BoundingBox.cpp

…

BoundingBox.hpp

…

BridgeDetector.cpp

…

BridgeDetector.hpp

…

Channel.hpp

…

ClipperUtils.cpp

Call Line conversion operator explicitly.

2019-04-03 11:17:15 +02:00

ClipperUtils.hpp

Optimizing manual unification.

2019-03-26 15:05:57 +01:00

clonable_ptr.hpp

Implemented the "Support for support enforcers only" quick selection.

2019-05-03 18:01:39 +02:00

CMakeLists.txt

Moved the GLEW dependencies from libslic3r to the gui slic3r library.

2019-04-12 12:57:45 +02:00

Config.cpp

Fix of "PrusaSlicer 2.0.0.-rc+ g-code error when importing #2304 "

2019-05-21 09:41:46 +02:00

Config.hpp

Added ConfigDef::get_default_value<>() template,

2019-05-03 18:30:58 +02:00

EdgeGrid.cpp

…

EdgeGrid.hpp

…

ExPolygon.cpp

…

ExPolygon.hpp

…

ExPolygonCollection.cpp

…

ExPolygonCollection.hpp

…

Extruder.cpp

…

Extruder.hpp

…

ExtrusionEntity.cpp

…

ExtrusionEntity.hpp

…

ExtrusionEntityCollection.cpp

…

ExtrusionEntityCollection.hpp

…

ExtrusionSimulator.cpp

…

ExtrusionSimulator.hpp

…

FileParserError.hpp

…

Flow.cpp

…

Flow.hpp

Elephant foot compensation improvements.

2019-03-05 11:54:04 +01:00

GCode.cpp

Changed the G-code export and send to OctoPrint GUI code

2019-05-17 16:27:00 +02:00

GCode.hpp

Disabled the experimental pressure equalizer.

2019-01-29 18:07:45 +01:00

GCodeReader.cpp

…

GCodeReader.hpp

Get name of both the G-code and project file from the 1st printable

2019-02-01 11:44:08 +01:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeTimeEstimator.cpp

Fix of #1380 - Wrong estimated time when using extruder absolute coordinates

2019-04-15 12:54:57 +02:00

GCodeTimeEstimator.hpp

Fix of #2082 -> Added lines M73 P100 and M73 Q100 to gcode to signal that print is finished

2019-04-08 11:54:58 +02:00

GCodeWriter.cpp

…

GCodeWriter.hpp

…

Geometry.cpp

Tech ENABLE_NEW_EULER_ANGLES set as default

2019-05-21 10:16:44 +02:00

Geometry.hpp

Tech ENABLE_VOLUMES_CENTERING_FIXES set as default

2019-05-21 09:42:59 +02:00

I18N.hpp

…

Int128.hpp

Build: MSVC 2017 compat (w/o xs code - Perl unit tests)

2019-01-29 17:11:07 +01:00

Layer.cpp

Implemented clipping of parts of multi-part objects in the order

2019-03-06 10:21:10 +01:00

Layer.hpp

Elephant foot compensation improvements.

2019-03-05 11:54:04 +01:00

LayerRegion.cpp

Improvement in handling of the custom bridging angle value.

2019-04-01 17:12:39 +02:00

libslic3r_version.h.in

Updated handling of the SLIC3R_BUILD_ID key

2019-05-13 18:01:00 +02:00

libslic3r.h

Fix build: Stray semicolon

2019-02-04 16:57:11 +01:00

Line.cpp

…

Line.hpp

…

Model.cpp

Tech ENABLE_GENERIC_SUBPARTS_PLACEMENT set as default

2019-05-21 10:01:04 +02:00

Model.hpp

Tech ENABLE_VOLUMES_CENTERING_FIXES set as default

2019-05-21 09:42:59 +02:00

ModelArrange.cpp

Changed references to renamed github project

2019-05-14 19:46:01 +02:00

ModelArrange.hpp

Arrange is accounting for the wipe tower now

2019-05-06 08:14:45 +02:00

MotionPlanner.cpp

…

MotionPlanner.hpp

…

MTUtils.hpp

Hypothetical support of different object layer heights.

2019-03-25 09:55:48 +01:00

MultiPoint.cpp

…

MultiPoint.hpp

…

MutablePriorityQueue.hpp

…

pchheader.cpp

…

pchheader.hpp

…

PerimeterGenerator.cpp

…

PerimeterGenerator.hpp

…

PlaceholderParser.cpp

…

PlaceholderParser.hpp

Fixed an issue, where the output G-code file name was not always updated

2019-02-03 10:41:14 +01:00

Point.cpp

…

Point.hpp

WIP: Transformation of instances in world coordinate space:

2019-04-26 17:28:31 +02:00

Polygon.cpp

…

Polygon.hpp

…

Polyline.cpp

…

Polyline.hpp

…

PolylineCollection.cpp

…

PolylineCollection.hpp

…

Print.cpp

Fixed unit tests when run with range checks on std::vector

2019-05-22 16:48:20 +02:00

Print.hpp

Fixed unit tests when run with range checks on std::vector

2019-05-22 16:48:20 +02:00

PrintBase.cpp

Changed the G-code export and send to OctoPrint GUI code

2019-05-17 16:27:00 +02:00

PrintBase.hpp

Fixed unit tests when run with range checks on std::vector

2019-05-22 16:48:20 +02:00

PrintConfig.cpp

Fix of

2019-05-17 11:46:46 +02:00

PrintConfig.hpp

Fix of

2019-05-17 11:46:46 +02:00

PrintExport.hpp

Adding absolute correction (XY offset) and gamma correction parameters.

2019-04-09 13:42:32 +02:00

PrintObject.cpp

Fixed unit tests when run with range checks on std::vector

2019-05-22 16:48:20 +02:00

PrintRegion.cpp

…

SLAPrint.cpp

Fixed update of the SLA back end object properties, leading to

2019-05-23 15:43:16 +02:00

SLAPrint.hpp

Changed the G-code export and send to OctoPrint GUI code

2019-05-17 16:27:00 +02:00

Slicing.cpp

Fix of caching of the SlicingParamerters at PrintObject

2019-03-05 14:05:58 +01:00

Slicing.hpp

Fix of caching of the SlicingParamerters at PrintObject

2019-03-05 14:05:58 +01:00

SlicingAdaptive.cpp

…

SlicingAdaptive.hpp

…

SupportMaterial.cpp

Partial fix of "Wrong width of perimeter for solid anchors #1803 "

2019-04-18 15:08:11 +02:00

SupportMaterial.hpp

…

Surface.cpp

Split the external infill pattern to separate top / bottom config values.

2019-02-22 15:25:35 +01:00

Surface.hpp

Split the external infill pattern to separate top / bottom config values.

2019-02-22 15:25:35 +01:00

SurfaceCollection.cpp

…

SurfaceCollection.hpp

…

SVG.cpp

…

SVG.hpp

…

Technologies.hpp

Disabled debug render statistics dialog

2019-05-27 09:20:48 +02:00

Tesselate.cpp

Extended tesselation wrapper for other 3d and 2d point types.

2019-02-08 09:26:48 +01:00

Tesselate.hpp

Extended tesselation wrapper for other 3d and 2d point types.

2019-02-08 09:26:48 +01:00

TriangleMesh.cpp

Use generic qhull include location

2019-05-22 10:29:54 +02:00

TriangleMesh.hpp

WIP: Transformation of instances in world coordinate space:

2019-04-26 17:28:31 +02:00

utils.cpp

Changed references to renamed github project

2019-05-14 19:46:01 +02:00

Utils.hpp

Changed references to renamed github project

2019-05-14 19:46:01 +02:00

Zipper.cpp

Altering sla export interface to support explicit project name.

2019-04-04 12:30:11 +02:00

Zipper.hpp

Altering sla export interface to support explicit project name.

2019-04-04 12:30:11 +02:00